Macard WiFi Extender Not Working

How to Troubleshoot the Macard WiFi Extender Not Working Issues?

In this modern era, an uninterrupted internet connection is the primary necessity to connect to this digital world. Similarly, Macard range extenders are one of the such gadgets that extend the network coverage and eliminate dead zones. But occasionally users face Macard WiFi extender not working issue which is most common among them.

In addition, this issue primarily arises due to the poor signal strength and the extender is out of the router’s network range. On the other hand, many other causes are also responsible for the Macard WiFi extender not responding problem. So, to find detailed information on the reasons and easy troubleshooting tips, you must read this guide.

Why is the Macard Extender Not Working?

Moreover, you know that the primary reason for the Macard repeater not working is the internet disconnectivity. Besides this, a few of the other causes are listed below:

How to Fix the Macard WiFi Extender Not Working?

Further, you are now aware of the primary reasons behind the not working issues of your range extender. Similarly, it is essential to fix the Macard Extender Does Not Work problem to resume the normal functioning of the networking device. So, we shed light on the effective troubleshooting tips to resolve the not working error on your repeater. So, take a brief look once:

Stabilize the Network Connection

Generally, while accessing your networking device, it is necessary to join the internet wirelessly or use the ethernet cable connection. Additionally, if you face issues with the wireless network, then a wired network is a good option.

Enter Accurate Password

When you are connecting to the extender’s wifi network and use the wrong password, then the Macard extender not working error occurs. So, enter the accurate wifi network and admin password to access the web interface of the range extender. 

Eliminate the Signal Obstructions

Sometimes the repeater faces a not working issue when the signal is interrupted due to the presence of interferences, such as microwaves, cordless phones, mirrors, baby monitors, furniture, etc. So, it is necessary to remove all these interferences or reposition your repeater to another central location.

Contact Your ISP Authority

If you are facing continuous network issues, are unable to access the admin panel of the device, or there is no internet shown, then contact your internet service provider. They will explain the reasons and guide you through the procedure to fix the Macard WiFi extender not working after reset or before reset. 

Contact your ISP authority

Check the Device Compatibility

When you are accessing the web interface of the repeater or configuring it, then check the compatibility of the smart gadgets, such as computers/tab/smartphones, etc. If these are incompatible, then you can’t use the web address or the app to use your networking device. 

Reboot the Wifi Extender

Sometimes the Macard WiFi extender not responding issue arises due to technical glitches and bugs on the networking device. So, this will halt the functioning of the range extender and you can’t connect to the desired network. Hence, power cycle the repeater and check if the issue gets fixed.

Reboot the wifi extender

Check the Extender Configuration

When you are configuring your range extender and can’t save the settings or these are not according to the recommendations, then not working or connecting error is very common. So, recheck the network settings on the repeater and if needed then reconfigure them. 

Place the Repeater Closer to the Router

Additionally, the distance between the router and the wifi extender causes the Macard WiFi extender not working issue. Hence, place the Macard extender in the room where the router is positioned or within the range area of the gateway. 

Place the repeater closer to the router

Update the Compatible Firmware File Version

When your range booster runs on outdated firmware, the firmware file is corrupted or incompatible, then not working issue occurs for sure. Therefore, it is recommended to use the compatible and recent version of the firmware according to the repeater model you use. Similarly, timely check that your wireless networking device runs on the latest firmware or not, and if needed upgrade it. 

Hard Reset the Macard Extender

When you are unable to fix the not working or connecting issues on your wifi repeater, then the factory reset the networking device. This will revert your range extender to its default settings and you have to reconfigure it from scratch.

Hard reset the Macard extender

If you still need to know more, then get in touch with us here!

Scroll to Top